The Lexmark printer X4650 setup is an all-in-one inkjet machine. This Lexmark printer is aimed for home and small-office use. With superior Wi-Fi support, the printer has a lot to offer.


Lexmark Printer Setup


For the Lexmark X4650 printer setup, there are two main procedures. Scroll down to read more.


  • Unpack the Lexmark printer from the carton.
  • Place the printer on a flat surface; ensure that the printer is away from direct sunlight.
  • Remove the protective tapes surrounding the printer body and other packaging material.
  • Raise the paper support tray from the back of the Lexmark printer X4650 setup.
Lexmark X4650 Hardware Setup
Printer unboxing

The hardware setup of the printer is complete; continue reading to complete the full Lexmark X4650 printer setup.

Loading Paper


Power ON The Printer

One more way is to download the driver from the official Lexmark support page.

Now that the hardware and the software setups are complete, you can start performing print jobs and other tasks that the Lexmark X4650 printer supports.If you have any difficulty regarding the unboxing Lexmark printer X4650 setup, click the Call button on this page. Our dedicated Technical Team will work on all possibilities, so you won’t have trouble performing the setup.

  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.