CONNECT CHROMECAST TO WIFI:

Google’s Chromecast is a cool streaming device that is loved and used by thousands of people around the world. This streaming device is designed to stream content from your smartphone or computer onto the big screen. However, to stream content, you need to connect it to an active Wi-Fi connection.

If you haven’t connected your Chromecast device to the Wi-Fi network or looking for the simple steps to connect Chromecast to Wi-Fi, then scroll down this page to learn How To Connect Chromecast To WiFi.

Before beginning the connectivity process, ensure the following:

The Chromecast device is connected to your TV using the HDMI cable.

Connect Using HDMI Cable

You have installed the “Google Home” app on your smartphone.

(Note: If you wish to use the Chromecast device on your computer, then make sure that the Google Chrome web browser is installed on it. The Google Home app is designed to work with iOS and Android OS.)

Connecting Chromecast To Wi-Fi

If you wish to change the Wi-Fi network on Chromecast, then follow the below instructions.

WIRELESS CONNECTION SETUP

  • Open the Google Home app if it is closed.
  • Go to the Settings menu followed by the Wi-Fi section.
  • Select the active or existing Wi-Fi network.
  • Tap the Forget Network option.
  • Now, the saved or connected network will be removed.
  • Tap the Wi-Fi icon again and choose the Wi-Fi network to which you wish to connect the Chromecast device.
  • After selecting it, type the network key and tap Done.

Click the Call button to contact us to know more about how to connect Chromecast to Wi-Fi.

Faq
  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.

call