Carry out these how to connect Canon printer to computer steps to connect your Canon printer to a computer using a USB connection:

  • Before starting the process, turn on your Canon printer and verify whether you have completed the basic printer settings.
  • Make sure not to connect the printer to your computer until prompted during the driver installation.
  • Turn on your computer and insert the setup CD into the CD/DVD drive of the computer.
  • Open the CD drivefolder and run the installer file.
  • Alternatively, you can download the printer driver from the Canon printer’s official
  • After downloading the printer driver, navigate to the Downloads folder and give a double-click on the installer file to begin the driver setup.
  • Make sure that you have removed the previously installed Canon printer driver from your computer.
  • In the Setup Wizard window, click the Start Setup button to begin the driver installation process.
  • Select your region or place of residence from the drop-down menu and click Next .
  • Read the EULA and click the Agree button to proceed with the installation process using how to connect Canon printer to computer guide.
  • Choose the USB connection option as your connection method and click Next.
  • Connect the Canon printer to the computer using a standard USB
  • Once the printer is connected successfully, the Setup Wizard screen displays the "Connection Completed" message.
  • Click the Next button, followed by the Execute option to print a test page remotely from the computer to the printer for verification.
  • Ensure that you have loaded the paper input tray with some plain papers.
  • If the Canonprinter prints the test page, the connection is successful.

Carry out these steps to connect the Canon printer to the computer using the Easy Wireless Connect method:

  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.