Simple Steps - How To Change Printer Default Settings On Mac?

Sometimes, there might be a necessity to know How to change your printer default settings on your Mac  computer. To achieve this task, you should have administrator rights on your Mac. In other words, you should be logged in with an account having administrator rights to alter these settings on your Mac computer. Let’s now look into the steps to do the same.

NOTE: We will be using the CUPS interface to change the default settings on your Mac.

  • Open a web browser on your Mac computer. Enter 0.0.1:631/printers in the URL bar (or address bar) of the browser. In case you find an error message that says, “web interface is disabled,” or “cannot connect,” navigate to the Utilities section under Applications.
  • Next, go to the Terminal app and then type in the following command:
  • cupsctl WebInterface=Yes
  • After typing in the above command, continue with the instructions to change the printer default settings on your Mac computer.
  • On the page that displays next, choose your printer name. It will be in the form of a link.
  • Now, on the next page, select Set default options under Start making the desired changes for the various options.
  • Once you have completed making all the necessary changes, go to the bottom of the list of options. Here, click on Set Default Options.
  • You will now find a prompt to enter your administrator username and password. So, enter these credentials in the dialog box that pops up.
  • Now, click on the blue OK button located at the lower-right corner of the dialog box.
  • You can now return to the Terminal To disable the webpage you were using, type in the following command:
  • cupsctl WebInterface=No
  • You have now known How To Change Printer Default Settings On Mac computer.
Faq
  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.

call