Epson printers are usually compatible with iOS and so, printing from an iPhone is not a big deal. Also, if your Epson printer supports AirPrint, then you don’t even need the Epson app to be installed on your iPhone. Having both the printer and iPhone on the same network is enough to print your documents. There is one other option to connect the Epson printer to your iPhone, i.e., using the Epson iPrint app.Do you want to know how to add an Epson printer to iPhone? Keep reading. 

INSTALL THE EPSON IPRINT APP

Before adding the printer to your iPhone, you need to install the Epson iPrint app. Follow these steps.

Once you have installed the iPrint app, you can proceed to connect the Epson printer to the iPhone.

STEPS FOR ADDING EPSON PRINTER TO IPHONE

Connect your Epson printer to the same network as your iPhone. Otherwise, enable the Wireless Direct feature on your printer. Want to know how to do this? Call us!

  • Open the iPrint app on your iPhone.
  • The app will display a message Printer is not selected.
  • Tap on the Tap to select your printer.
  • Look for your Epson printer name in the Local tab; tap on its name.
  • If your printer is not showing in the list of all available printers, then search for it using the search bar.
  • If it still doesn't appear, then you can connect the Epson printer manually to your iPhone by tapping on the Wi-Fi Direct Setup option under the Manual IP tab.
  • In the end, tap on the Add option you see at the bottom of that window.

Finally, we have seen how to add an Epson printer to iPhone.

Faq
  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.

call