ADD AN AIRPRINT PRINTER TO MY IPHONE

AirPrint is a feature developed by Apple to connect iOS devices to printers over a wireless network. You can use AirPrint instead of using the printer driver on your device. If you wish to add an AirPrint-enabled printer to your iPhone, follow the below-mentioned how to add an airprint printer to my iphone steps.

  • Before adding the AirPrint printer, you need to connect both the devices with the same wireless network.
  • Turn on the printer and connect it to the wireless network using the WPS push button or Wireless Setup Wizard
  • Make sure you turn on the Wi-Fi router before executing the process.
  • To connect the iPhone to the same wireless network, tap the Wi-Fi button first, and choose the SSID of your Wi-Fi router and move on with how to add an airprint printer to my iphone guide.
  • Enter the correct passwordand tap the Connect button to use the wireless data from the Wi-Fi router.
  • Load some plain paper into the paper tray.
  • Open the AirPrint-supported apps such as Mail , Safari , or Evernote on your iPhone.
  • Tap the Share icon and select the Print
  • Tap the Select Printer option and choose your AirPrint printer from the displayed list.
  • Since both the devices are connected over the same wireless network, the printer name will be displayed on the screen without fail.
  • After selecting the printer, choose the number of copies to be printed.
  • Finally, tap the Print button to print the selected page.
  • The printer name will be added automatically on your iPhone after you complete the print job.
  • By finishing how to add an airprint printer to my iphone steps, When you try to print using the same printer again, your iPhone will suggest the name automatically.
Faq
  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.

call