This article is all about the Epson WF-7710 setup. Here, we have instructions for unboxing, driver and manual download, and how to use the scan feature.The Epson WorkForce WF-7710 wide-format printer is designed to provide print-shop quality borderless printing. The versatile printer has wireless capabilities to print from tablets and smartphones. Also, it features Wi-Fi Direct, Ethernet, and NFC.
Print, scan, copy, and fax
Prints up to 18ppm in black and 10ppm in color
Auto 2-sided print/scan/copy/fax
250-sheet paper tray
35-pages Auto Document Feeder
Wireless connectivity for mobile printing
4.3" color touchscreen
UNBOXING YOUR PRINTER
Open the device package and take out the printer and all the documents related to the printer.
Remove all the protective tapes and materials from the printer.
Slowly lift the scanner unit.
Remove any protective materials inside the printer.
Lower the scanner unit.
CONFIGURING YOUR PRINTER
First, connect the power cable to the rear of your printer and an electrical outlet.
Lift the control panel and turn on your printer.
Choose your country and language.
Select the date and time.
INSTALLING THE INK CARTRIDGES
Raise the scanner unit.
Unlock the ink cartridge cover.
Gently shake the ink cartridge before unpacking.
Unwrap the ink cartridge carefully without touching the green chip on the cartridge.
Remove the yellow tape from the ink cartridge.
Insert the cartridge into the corresponding holder.
Press on the cartridge using your finger until it clicks.
Repeat the steps for installing all the cartridges.
Check if you have installed all the ink cartridges correctly.
Lock the ink cartridge cover.
Lower the scanner unit.
Now, the printer starts to charge the ink. It may take up to 6 minutes. Wait until you see a completion message on your printer's screen.
Ensure that the printer has finished charging the ink.
Pull out the paper cassette.
Take off the paper cassette cover.
Move away the side edge guides.
Set the front edge guide exactly to the paper size.
Load paper against the front edge guide.
Slide the side edge guides towards the paper.
Attach the paper cassette cover.
Insert the paper cassette.
Open the output tray and the paper stopper.
Select the paper settings using the control panel.
HOW TO DOWNLOAD EPSON WF-7710 DRIVER
If you are looking to download a compatible driver for your printer, you can visit the official Epson site.
On your computer, navigate to the official Epson site.
Place your mouse pointer over the Support tab.
Click on Printers from the pop-up.
On the next page, enter your printer model and click Search.
When you see the product home page, select the Downloads tab.
Click on the Please choose an OS drop-down menu.
Select your operating system (Windows, Mac OS, Chrome OS, or Linux). Click the GO button.
Expand the Drivers section to find a list of drivers.
Click Download next to the most appropriate driver for your printer.
HOW TO DOWNLOAD EPSON WF-7710 MANUAL
On your system browser, navigate to Epson's official site.
Click the Support tab and select Printers.
Type "WF-7710" in the search field and click Search.
Choose your printer (Epson WF-7710) from the search result.
Select the Manuals and Warranty tab.
Under the Manuals and Warranty section, you can find the User Guide, Installation Guide, and other documents.
Select the document you wish to download.
Once downloaded, you can find the document in the Downloads folder of your computer.
HOW TO SET UP EPSON WF 7710 – WIRELESS METHOD
After downloading the driver file, double-click on the setup file to run it.
When you see the License Agreement screen, choose Agree.
If you are asked to select any optional software to install, select the checkbox of the software you want to install on your computer.
After choosing the software, click Install.
Now, the Epson drivers and utilities installation process starts and may take a few minutes to complete.
Once completed, you are instructed to select your connection type. Choose Wireless connection.
In the Select Setup Option window, click the Set up printer for the first time option and choose Next.
Next, if you are asked to use Wi-Fi Auto Connect, select Yes (recommended) and then choose Next.
When asked to select a wireless network setup method, select the Using control panel option.
Note: This will automatically connect your printer to your wireless network.Go to your printer's control panel to begin the network connection process.
On the Know Your Wireless Network screen, your network credentials can be found if you have connected your computer to the network. Click Next.
Continuing setup process on your printer:
Select the Home icon on your control panel.
Tap the Wireless icon.
Select Router on the Select Connection Method screen.
Tap Start Setup.
Select Wi-Fi Setup Wizard.
Wait until the printer finishes searching for a network.
On the next screen, select your access point.
Enter your network credentials and tap Start Setup.
The wireless connection process may take a few seconds.
Follow the remaining on-screen instructions to finish the wireless setup process.
HOW TO SCAN - EPSON WF-7710
This section tells you how to scan using the printer's control panel and send it to various destinations. The printer automatically chooses the scan settings, but you are allowed to view and change them if required.
SCAN TO COMPUTER
Ensure you have installed the software and connected your printer to your network or computer.
Load the original document on the printer (on the scanner glass).
Select the Home icon.
Choose the Scan option.
Next, select Computer to scan the document to your computer.
SCAN TO EMAIL
Place the original on the scanner glass.
Press the Home icon.
Choose Email to attach the scanned document to your email.
We hope this article about the Epson WF-7710 setup helps you in the right way. For any printer-related queries, feel free to contact us.
First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.
The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.
Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)
WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.
To restore your HP printer to factory-default settings, follow these steps.
Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect.
Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.
Release the Resume button.