Rectify Paper Jamming Issue On Epson Printer

If your Epson printer keeps jamming paper, then scroll down this page to know how to clear it.

We all know that the Epson printer is one of the leading printer manufacturers in the world. Epson mainly focuses on developing advanced printers that could fulfill all printing needs. However, when we work with any advanced technology, it is very common for an error or issue to occur. Paper jam is one of the issues that is encountered by most printer users. On this page, we shall discuss the solutions for the issue in the below section.

Generally, the paper gets jammed in different parts of the printer, such as inside the printer, ADF, and the output tray of the printer. Before removing the jammed paper, perform a basic solution, which is to restart the printer. That means, as soon as the Paper Jam message is displayed on your printer’s screen, restart the printer. If the same message is displayed on the screen even after the restart, then look for the jammed paper and remove it from your printer.

Before removing the jammed paper, cancel all the ongoing or existing print jobs.  After canceling the print jobs, find and remove the jammed paper from your printer as discussed below.

Removing the jammed from inside the Epson printer

Scroll down this page to know the other solutions if your  Epson printer keeps jamming paper.

Removing the jammed paper from the ADF

  • Remove the remaining paper left in the ADF.
  • Now, open your Epson printer’s ADF cover.
  • Look for the jammed paper inside the ADF.
  • Carefully remove the jammed paper if you find any.
  • After removing the jammed paper from the ADF, close the cover of your printer.
  • Raise or open the document cover.
  • From the document feeder, remove the jammed paper and close the cover.

To get more troubleshooting tips to clear your Epson printer keeps jamming paper issue, contact us.

Faq
  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.

call