Epson Eco Tank ET 3700, just as the name implies, comes with the eco tank so that you can save your money. If you want to know better about Epson ET 3700 Setup including the procedure for downloading the driver, and connecting the printer to your computer continue to read this page.
Epson Et 3700 Printer Setup
Unpack
Unpack the product box and take out your printer and all its accessories.
Take off all the protective covers and packing tapes from the items you received.
Make sure that all the items are delivered without any damage.
Fill the ink tanks
Open the ink tank cover.
Open the ink tank cap you are going to fill.
Unpack an ink bottle and remove its cap.
Align the bottle with the ink tank and fill the tank.
Repeat the same procedure for all the ink tanks.
Finally, close the ink tank cap and the ink tank cover.
Power on the printer
Connect your printer's rear port and an electrical outlet using the given power cord.
Lift the control panel and press the Power button.
When your printer turns on, select your preferred language.
On your Epson printer control panel, press the Start button to begin the ink charging process.
Load the paper
Before you start loading the paper, make sure that the ink charging process is over.
Pull out the paper cassette and move the paper guides to the extreme ends.
Take a paper stack and load it into the paper cassette.
Adjust the guides against the paper.
Insert the paper cassette into the printer.
Choose your preferred print settings on the control panel.
Connect your printer to your computer
Take the installation disk you received and insert it into your computer's CD drive.
If your computer doesn't have a CD drive, get the software from Epson's official site.
Visit Epson's official website, enter your printer model, and download the driver compatible with your Operating System.
Once the download gets completed, locate the driver file in the Downloads folder or within your browser and run the setup file.
If the User Account Control (UAC) dialog box appears, click Yes.
Accept the end-user license agreement and choose your preferred connection method.
Proceed with the instructions on the screen and complete the printer setup.
Epson Et 3700 Scan
Before you scan your documents, make sure that you have installed the scanner software on your computer, and the printer is connected to your computer.
Place the documents on the scanner glass.
Press the Home button and select Scan.
When you see the Scan to screen, select your preferred option.
If you want to scan your documents to your computer, tap the Computer option.
For sending your scanned files to Cloud, select the Cloud option.
Go ahead with the instructions and complete the scanning process.
Epson Et 3700 Scan To Computer
Place the originals on the scanner glass.
Press the Home button and tap Scan.
On the Scan to screen, select Computer.
If you have connected your computer and the printer using the USB cable, the scanned documents will be automatically sent to the connected computer.
If you have connected your devices over a network, select your computer from the list of nearby computers.
Now select the preferred scanning type. If you want to save your documents as PDF, select Save as PDF. To save the documents as JPEG, select Save as JPEG.
Finally, select Save to start scanning.
Epson Et 3700 Scan To Email
Place the originals on the scanner glass.
On your printer control panel, press the Home button and tap Scan.
On the Scan to screen, select Computer.
If you have connected your computer and the printer using the USB cable, the scanned documents will be automatically sent to the connected computer.
If you have connected your devices over a network, select your computer from the list of nearby computers.
To send the scanned documents as an email, select the Attach to email option. Now, your default email program will be opened, and the scanned document will be saved as an email attachment.
Finally, select the Scan option to start scanning.
Epson Et 3700 Driver
A printer driver establishes smooth communication between a printer and a computer. It translates the computer's language into a format a printer can understand. For your Epson ET 3700 printer, you can install the driver using the supplied CD-ROM. You can also get the driver from its official website. The following sections will guide you through the whole process of installing the driver from Epson's official website.
Visit Epson's official website from your default browser.
In the Search by Product Name field, type ET 3700 and press Enter.
From the search results, click on the right printer.
When directed to the product support page, click Downloads.
Choose your OS and the version from the Operating System drop-down menu.
When the compatible drivers are displayed, select the one you want and click Download.
Now, the selected driver will start to download in the background.
Epson Ecotank Et 3700 Manual
A printer's manual is the best resource to clear all doubts about your printer. If you want to download it, follow these instructions.
From your web browser, visit Epson's website.
Enter Epson ET 3700 in the field and press Enter.
When directed to the product support page, click Manuals and Warranty.
From the list of manuals, choose the one you want and click the PDF link.
When the selected manual opens in a new tab of your browser, click the Download icon and select the destination on your computer.
Epson Ecotank Et 3700 Wireless Setup
To connect your printer and the computer wirelessly, you should install the appropriate printer driver on your computer. The previous sections will guide you through the whole process of downloading and installing the printer driver.
Connect your printer to your router
On your printer control panel, press the Home button. Select the wireless icon and press OK.
As soon as possible, press your router's WPS button.
Proceed with the instructions on the LCD screen to complete the WPS setup.
Ensure that you have connected your Epson printer to the same network to which you have connected your computer.
Now, open the printer driver on your computer and start printing wirelessly.
Epson Ecotank Et 3700 Setup For Mac
Complete the hardware setup of your printer.
Download the printer driver on your Mac.
Open the downloaded file within your browser and begin the installation process.
If prompted, enter the administrator password.
When the software's license agreement appears, accept the terms and conditions.
On the connection method screen, choose your preferred connection method and connect your printer and the Mac accordingly.
Once the connection is established between your Epson printer and the Mac, you can start printing wirelessly.
Epson Et 3700 Troubleshooting
Usually, Epson's Eco Tank printers are equipped with the best features, so you can blindly trust the functionality of Epson ET 3700. However, you may encounter a few issues with your Epson ET 3700 printer. But, when you handle the issues with the appropriate solutions, you can fix them in an easier way. In the oncoming sections, we have given you the best solutions for common problems that can easily occur on a printer.
Epson Et 3700 Not Printing
If your Epson ET 3700 printer is not printing, you should check the basics first. Check whether your printer is turned on and has enough paper and ink to print. If you have connected your printer and the computer using a USB connection, check whether the USB ports and the USB cables are working fine. If necessary, replace the USB cable with a new one. If you have connected your printer and the computer over a network, check whether they are connected to the same network.
Power cycle your printer. To do so, turn off your Epson printer and disconnect the power cord. Leave it undisturbed for a minute. Then, reconnect the power cord to your Epson printer and turn it on.
Uninstall the printer driver from your computer and reinstall it; this step can help you fix the issue.
To send all the print documents directly to your Epson ET 3700 printer, you should set it as the default one. To do so, click Start and go to the Devices and Printers section. Right-click on your Epson printer and select the Set as default printer option.
When the print jobs pile up on your printer's memory, your printer may fail to print any documents. To fix this issue, you should cancel all the pending print jobs. To do so, click Start and go to the Devices and Printers section. From the list of connected printers, right-click on your printer and select See what's printing. Then, go to the Printer tab and click Cancel All Documents.
Epson Et 3700 Not Printing Color
If your Epson Eco Tank ET 3700 printer is not printing color, you need to check whether the ink tanks have sufficient ink. If you find any empty or critically low ink tanks, fill them with Epson's ink.
If you have filled the ink tanks with any third-party ink bottles, your printer will not function well. Empty the ink tanks and refill them with Epson's ink.
When the print heads are clogged, you should run a nozzle check. To do so, on the printer's home screen, select Maintenance and press OK. On the Maintenance screen, select Print Head Nozzle Check and press OK. When your printer prints the nozzle check pattern, review the pattern. If you find any gaps, proceed with the print head cleaning process.
You can clean the print heads using the computer utility or the printer control panel. To clean the print heads via the printer control panel, select Maintenance on the home screen of your printer and press OK. Select Print Head Cleaning and press OK. Once the print head cleaning process is finished, you will receive a message on the LCD screen.
Again print a nozzle check pattern to check whether the print head is clean now.
If necessary, clean the print heads again and check whether your printer can print color now.
In most instances, you can fix the issue by aligning the print heads. To do so, select Maintenance and press OK. Select Print Head Alignment and press OK. Choose the preferred alignment option and press OK. Now, check whether your printer can print color.
Check the media settings. If there is a mismatch between the media type you have loaded and the media settings, make the necessary changes and check whether your issue is resolved.
Epson Et 3700 Won't Scan
Check whether your printer shows an error code. If so, fix it with the appropriate solutions.
A paper jam can spoil the overall performance of your printer. Remove all the jammed paper from your printer and check whether you can scan now.
It is mandatory to set your printer as the default. If you don't do that, your printer will not receive the print jobs you send from your computer. To set your Epson ET 3700 printer as the default one, click Start and go to the Devices and Printers section. Right-click on your Epson printer and select the Set as default printer option. Now check whether you can scan.
If you have connected your printer and the computer over a network, check whether the Internet connection is stable. For a USB connection, check whether the connection is stable at both ends. If necessary, replace the USB cable with a new one.
An outdated or corrupted driver can stop your scanner from working well. So, reinstall the printer/scanner driver and check whether the issue is resolved. If your printer driver is outdated, update it to the recent version.
Whatever the issue is, a power cycle can help you fix it. To power cycle your Epson ET 3700 printer, turn it off and disconnect its power cable. Leave your printer to be disconnected for a minute. Then, reconnect the power cord to your printer, turn it on, and check whether you can scan now.
These are some of the best troubleshooting methods for Epson Et3700 Setup . In case you are still facing the issue, just get in touch with our technicians
First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.
The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.
Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)
WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.
To restore your HP printer to factory-default settings, follow these steps.
Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect.
Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.
Release the Resume button.
