Epson Et 16500 Setup - Setup-Solution | Printer Driver

Epson ET 16500 is an all-in-one wireless inkjet printer ideal for your printing requirements. It comes with easy-to-fill supersized ink tanks, and you don't need expensive cartridges anymore. If you want to know the complete setup of your Epson ET 16500 printer, you have reached the right place. Continue reading this article and complete setting up your printer.

Unpack

  • Unpack the product box and take out all the items you received.
  • Your package contains the Epson ET-16500 printer, power cord, quick setup guide, ink bottles, and an installation CD.
  • Remove all the protective coverings and packing tapes from the printer and its accessories.

Fill The Ink Tanks

  • Open the ink tank unit cover and remove the black ink tank's cap.
  • Unpack the black ink bottle and remove its cap. Take off all the protective materials. Refer to the color-coded sticker and fill the respective ink tank.
  • Repeat the procedure for all the ink tanks.
  • Finally, close the ink tank unit cover. 

Connect your printer and an electrical outlet

  • Take the power cord and connect it to your printer and an electrical outlet.
  • Turn on your Epson ET-16500 printer.
  • Choose your basic preferences, including language, date, and time.

Load the paper

  • Extend the paper cassette and slide the paper width guides all the way out.
  • Take a paper stack and load it into the paper cassette with the print side facing down.
  • Adjust the guides against the paper and insert the paper cassette into the printer.
  • Choose your print settings on the printer control panel.

Connect Your Printer To Your Computer

  • Insert the supplied CD-ROM into your computer's CD drive. 
  • Run the setup file and install the software on your computer by following the instructions.
  • If your computer doesn't have a CD drive, you can get the software from the official site of Epson.

Epson Et 16500 Driver

You need to install the appropriate driver on your computer to access your Epson ET 16500 printer. Without it, you cannot access your printer from your devices. If you have the CD-ROM you received along with the printer package and CD reader on your computer, install the software using the supplied CD. In case your computer doesn't have a CD reader, you can get the software from Epson's website. Follow these instructions for the detailed procedure.

  • Visit Epson's official support page from your default browser.
  • In the search area, type Epson ET-16500 and press Enter. 
  • From the search results, click on your printer.
  • When you are directed to the product support page, click Downloads.
  • Your OS will be detected on the Downloads page, and the appropriate drivers will be displayed. If you want to download the driver for a specific Operating System, click the drop-down menu next to the Operating System field and select your preferred Operating System. 
  • When it shows the compatible drivers, choose the one you want and click Download.
Start To Download Epson ET-16500 Pdf User Manuals
  • Now, the selected driver will start to download in the background.
  • Once the download gets concluded, locate the file within your browser and run the setup file.
  • If you see the User Account Control (UAC) dialog box, click Yes.
Epson ET-16500 Printer complete the installation
  • Proceed with the instructions that appear on the screen and complete the installation.

Epson Et 16500 Manual

The printer's manual lets you know your printer in a better way. If you want to know the procedure for getting the manual from Epson's official website, follow these instructions.

  • From your default web browser, visit the official support page of Epson.
  • Enter Epson ET 16500 in the search field and press Enter.
  • On the product support page, click Manuals and Warranty. 
  • From the list of manuals, choose the one you want and click the PDF link.
  • Now, the chosen manual will be opened in a new tab of your browser.
  • If you prefer, you can save it on your computer.
epson et 16500 airprint driver download

Epson Et 16500 Airprint

Epson ET 16500 is not AirPrint compatible.

Epson Et 16500 Troubleshooting

It is good to know the troubleshooting solutions as they can help you fix the ongoing issue without any technical assistance. This section deals with the best solutions to fix the frequently occurring problems on your printer.

Epson Et 16500 Not Printing

  • If your Epson ET 16500 is not printing, check whether it is turned on and all the cables are correctly connected. 
  • If you have connected your devices (printer and computer) via a USB cable, check whether the connection is firm enough at both ends. Disconnect and reconnect the cable. If required, replace the cable with a new one.
  • If your printer shows an error code, fix the issue with the appropriate solutions. 
  • If there is a paper jam on your printer, clear the jammed paper.
Devices and printers download
  • If you haven't set your printer as the default, set it now. To do so, click Start and go to the Devices and Printers section. Right-click on your printer and select the Set as default printer option.
  • When the print jobs pile up on your printer's memory, it may start to function. As a result, your printer will not print anything. In order to fix the issue, you should cancel all the print jobs sent so far. To do that, go to the Devices and Printers section. Right-click on your printer and select the See what's printing option. Go to the Printer tab and select the Cancel All Documents option.
How to Set Default Printer
  • A printer driver establishes smooth communication between your printer and computer. When there is a communication breakdown between these two devices, your printer will not print the documents. To fix this issue, update the printer driver to the latest version. Then check whether the issue is resolved. You can get the updated version from Epson's official website.
  • Any issue can be fixed with a power cycle. To power cycle your Epson printer, turn it off and unplug its power cord from the electrical outlet. After one minute, plug the power cord into the electrical outlet and turn on your printer. 

Epson Et 16500 Paper Jam

  • If your printer shows you the paper jam error on its control panel, follow these instructions to fix it.
  • Whenever there is a paper jam on your printer, it will show you the exact area whether the jam has occurred. You need to spot the area and remove all the jammed paper.
  • If there is a paper jam inside the printer, open the printer cover and remove all the jammed paper. Close the printer cover once you have taken out all the jammed paper.
  • If you find any jammed paper near the rear paper feed, take it out carefully.
  • Similarly, remove all the jammed paper from the output tray.
  • Reload the paper stack and resume the printing process.


If you want to prevent paper jams, always load paper only after fanning the sheets neatly. Make sure not to load the sheets beyond the indicated limit. Do not load damp, curled, or wrinkled sheets into the paper tray. When you take all these measures, you can prevent paper jams to some extent.

Now, If You Face any issues regarding epson printer, Then Click the Call button provided on this web page to get remote assistance for Epson ET 16500

Faq
  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.

call