Dell V313w will make you feel your home or office is a print shop. It will help you to print vivid color photos and documents at high speed with professional clarity and banding quality on various types of paper in a matter of seconds. The Dell V313w printer setup delivers borderless photos, whether it's a landscape or portrait, you can develop your own prints and frame them instantly.

The simple steps given below can be handy to set up your Dell V313w printer and connect it to a wireless network.


Once your hardware setup is done, you need to do a wireless setup for your Dell V313w printer.

  • Turn on your printer and the light should be lit in solid green.
  • Move to the control panel, set the language, country, and region.
  • Though it is mentioned as a wireless printer, it is recommended to use a USB cable for the initial setup. Connect the printer to your computer using a USB cable.
  • Begin the printer driver installation and follow the instructions until the drivers are installed for Dell V313w printer setup.
  • You should hear a beep sound, and the hardware installation bubbles should appear; if not, then click "I connected the cable but can't click Continue" for additional information. If a new hardware wizard window opens, click Continue and add the device.
  • Select or deselect on the product registration screen and click Continue.
  • On the following screen, click Finish.
  • Now click the Start button, go to All Programs, and choose Dell printers. Now click Dell Printer Home.
  • Look for the Settings tab and click on the Wireless setup utility.
  • Once the User Account Control window appears, click Continue.
  • Next, click Add a printer; now the printer will display its nearby networks.
  • Select your network and click Continue for Dell V313w printer setup.
  • Now the screen will ask you to enter the security key.
  • Verify your settings and click Continue.
  • The Dell V313w printer is configured and connected to your wireless network
  • Now you can view the Allow Dell Software window. Read the instructions, then click OK.
  • Follow the onscreen instruction and click Continue. Now remove the USB cable that you connected with the computer and then click Finish.

You have now successfully completed the Dell V313w printer setup.

  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.