Dell B1160W is the best choice if you wish to have a printer for home-use purposes. It can effectively print at a speed of 7.3 pages per minute, which is apt for a monochrome printer. It’s one of the most compact printers ever made and is also noted for its sheer size. Lets see about Dell B1160w Printer Setup in detail.


Dell Printer Unboxing


  • Unpack the Dell printer from the carton.
  • Place the printer on a proper flat surface, and ensure that the printer is placed closer to the computer.
  • Remove the power cord from the sealed packaging.
Dell B1160w Hardware Setup
Printer Driver Setup

The hardware setup for the Dell printer is complete; conclude the setup with the software installation.

Printer Software Connection


You can download the driver for the Dell B1160W printer setup from the official Dell printer support page.

Follow the two setup procedures (hardware and software setups) to know how to perform the Dell B1160W printer setup.

  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.