Chromebook Says The Printer Is Offline

Connecting a Chromebook to your printer is a simple task. That too, if it is a Google Cloud-Ready printer, it becomes much easier. But for some reason, if the Chromebook says printer is offline, then first analyze the main reason for the issue. Then perform appropriate troubleshooting steps to resolve the issue.

How To resolve The ‘Printer is Offline’ Issue?

Instructions For A Cloud-Ready Printer

  • Open Chrome Browser.
  • Enter chrome://devices in the address bar. Press Enter.
  • Search for the My devices section.
  • Locate your printer under this section. If the printer is correctly set up, then the device name appears.
  • If the printer’s name is visible, then the Chromebook is properly connected to the printer.

Instructions For A Regular Printer

Remove The Printer From Google Cloud Print

If still the Chromebook says printer is offline, click the CALL button and our technical expert will help you resolve the issue.

  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.