Ever had a dream of having a multi-functioning printer that can literally do all your tasks like printing, faxing, and scanning? If the answer is yes, then Brother printers should be your choice.Brother printers allow the user to perform multiple tasks and most Brother printers are all-in-one machines. However, when you perform a simple print function, the Brother printer may show an error code 50. But, there is no permanent solution for this error. After a series of comprehensive research, we have found the right solutions to fix the Brother printer error code 50.


Follow the methods given here in order to get rid of the Brother printer error code 50.


As we all know, paper jams are one of the most commonly occurring problems when it comes to a printer. There are also chances where the scraps of paper inside the printer will make the Brother printer to not print.


Hopefully, this method fixes the Brother printer error code 50.


  • Make sure the Brother printer is turned on.
  • Remove the power cord from the printer and the main power source.
  • Let the printer be idle for about 10 minutes.
  • Once done, connect the power cord to the printer and to the main power source.
  • Turn on the printer if it doesn’t turn on automatically.

Follow the methods as described. Since the solutions mentioned in this article are not for a particular Brother printer, you can talk to our technical support team for detailed assistance. Click the Call button and our technical representative will help you with the Brother printer error code 50.

  • Why is my wireless printer not printing?

    First, try restarting your computer, printer and wireless router. To check if your printer is connected to your network: Print a Wireless Network Test report from the printer control panel. On many printers pressing the Wireless button allows direct access to printing this report.

  • Why is my printer showing error?

    The other most probable reason for the printing error is the connection between your computer and the printer. If you are sure that the transmission cable is working okay (tested the printer on another computer), then the problem might be the drivers. This can be the printer drivers or the USB port drivers.

  • Why do my 3d prints keep failing?

    Another common fail is over extrusion. Over extrusion happens when your 3D printer pushes out too much plastic too fast, causing a jam in the end of the nozzle. ... Make sure YOURu layer height is less than your nozzle diameter. Increase your cooling fan's power (this will cool the plastic and cause it to slow down)

  • What is the WPS button?

    WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

  • How do I reset my printer?

    To restore your HP printer to factory-default settings, follow these steps. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button.